Zoom Georgia 8mm Drape

Georgia 8mm Drape

€155,00

For the bride who wants to make a statement in pearl, this beautiful, delicate, handmade hair drape is the way to do it!

This stunning hair accessory features two pins at the side of the head, linked together by an intricate pearl drape met in the centre by another vintage inspired comb. Delicately handmade to create this graceful drape is a series of pearls strung on sterling silver wire. The pins on either side are made of ivory beads and sterling silver wire woven into delicate floral shapes, This piece is ideal for a vintage style dress.

made from:

Swarovski pearls, Swarovski crystal and sterling silver wire.

Please note that these pieces are handmade, and so all measurements are approximate and may vary to within a centimetre of this description.

We offer free gift personalisation on all orders.

Just Enter your special message in the notes section upon checkout. You can add any little message you like to add that extra special touch.

 

Size Guide

The standard length for a bracelet is 7.5”. If you would like a custom length please follow these guidelines:

Measure your wrist with a flexible measuring tape or a strip of paper just below the wrist bone, where you would normally wear the bracelet. Decide on how you would like your bracelet to fit and add your wrist size to the appropriate measurement below: 

Snug fit: add 1/4" to 1/2"
Comfort fit: add 3/4" to 1"
Loose fit: add 1 1/4"    

Ring Size Guide

To measure your ring size at home:

METHOD 1. USE A STRING/FLOSS

To measure with a string, you will need the following:

String/Floss
Ruler
Pen/Marker

How to measure:

Cut a string that is about 6 inches long.
Fold the string around the base of the finger, just below the knuckle.
Mark where the string ends with the pen.
Place the measured string on the ruler with the area marked on your right.
The number closest to the pen mark is the circumference of the ring in millimeters.
Use the ring size chart to translate the measurements into a ring size.

METHOD 2. USE A STRIP OF PAPER

To measure the ring size using a strip of paper, you will need the following:

A strip of paper
Ruler
Pen/marker

How to measure:

Cut a thin strip of paper about 100 millimeters long.
Fold the thin strip of paper around the finger at the base and close enough to your knuckle.
Mark the area where the two ends of the paper strip meet.
Use the ruler to measure the length in millimeters to give you the circumference.
Convert the measurement to the appropriate ring size, using the ring size chart.

METHOD 3. USE A RING THAT FITS YOU

To measure the ring size using a ring that fits, you will need the following:

A ring at home that fits the finger that will wear the engagement ring
Ruler

How to measure:

Measure the internal diameter of the ring (that’s the hole inside the ring, excluding the metal).
Write down this measurement in millimeters, and use the conversion chart to find your ring size.

Each piece of jewellery from Azure has been meticulously handcrafted. We use only the finest of materials in our designs including sterling silver, Swarovski crystals, Swarovski pearls and semi-precious gemstones.

Wearing pearls keeps them lustrous and iridescent as the natural oils from you skin with give them shine. To ensure the lustre of your piece over time, follow these guidelines:

Do not wear when sleeping.Do not spray perfume directly on beads, pearls or metals.Avoid contact with water.Protect your jewellery in cotton bags or boxes when not in use.Clean with a soft damp soaped cloth & dry immediately. Do not use jewellery cleaner or abrasive on pearls.Sterling silver will tarnish over time and with use. Clean with a sterling silver jewellery cloth. Always put pearls on after your make up. Remove pearls before you apply body creams, or bathe.Pearl necklaces and bracelets should be restrung periodically.

 

Free Gift Personalisation

We offer free gift personalisation on all orders.

Just Enter your special message in the notes section upon checkout. You can add any little message you like to add that extra special touch.

 

Bracelet Size Guide

Size Guide

The standard length for a bracelet is 7.5”. If you would like a custom length please follow these guidelines:

Measure your wrist with a flexible measuring tape or a strip of paper just below the wrist bone, where you would normally wear the bracelet. Decide on how you would like your bracelet to fit and add your wrist size to the appropriate measurement below: 

Snug fit: add 1/4" to 1/2"
Comfort fit: add 3/4" to 1"
Loose fit: add 1 1/4"    

Ring Size Guide

Ring Size Guide

To measure your ring size at home:

METHOD 1. USE A STRING/FLOSS

To measure with a string, you will need the following:

String/Floss
Ruler
Pen/Marker

How to measure:

Cut a string that is about 6 inches long.
Fold the string around the base of the finger, just below the knuckle.
Mark where the string ends with the pen.
Place the measured string on the ruler with the area marked on your right.
The number closest to the pen mark is the circumference of the ring in millimeters.
Use the ring size chart to translate the measurements into a ring size.

METHOD 2. USE A STRIP OF PAPER

To measure the ring size using a strip of paper, you will need the following:

A strip of paper
Ruler
Pen/marker

How to measure:

Cut a thin strip of paper about 100 millimeters long.
Fold the thin strip of paper around the finger at the base and close enough to your knuckle.
Mark the area where the two ends of the paper strip meet.
Use the ruler to measure the length in millimeters to give you the circumference.
Convert the measurement to the appropriate ring size, using the ring size chart.

METHOD 3. USE A RING THAT FITS YOU

To measure the ring size using a ring that fits, you will need the following:

A ring at home that fits the finger that will wear the engagement ring
Ruler

How to measure:

Measure the internal diameter of the ring (that’s the hole inside the ring, excluding the metal).
Write down this measurement in millimeters, and use the conversion chart to find your ring size.

Care Instructions

Each piece of jewellery from Azure has been meticulously handcrafted. We use only the finest of materials in our designs including sterling silver, Swarovski crystals, Swarovski pearls and semi-precious gemstones.

Wearing pearls keeps them lustrous and iridescent as the natural oils from you skin with give them shine. To ensure the lustre of your piece over time, follow these guidelines:

Do not wear when sleeping.Do not spray perfume directly on beads, pearls or metals.Avoid contact with water.Protect your jewellery in cotton bags or boxes when not in use.Clean with a soft damp soaped cloth & dry immediately. Do not use jewellery cleaner or abrasive on pearls.Sterling silver will tarnish over time and with use. Clean with a sterling silver jewellery cloth. Always put pearls on after your make up. Remove pearls before you apply body creams, or bathe.Pearl necklaces and bracelets should be restrung periodically.

 

Georgia 8mm Drape

€155,00